Kodak 3.68kWh 48V Battery Module

The BL3.6 Kodak battery is a high performance, 3.68kWh, scalable battery module perfect for expanding systems. A Single BL3.6 battery module allows up to 5000W ofcontinuousdischarge power. This means only one BL3.6 battery module is required for a 5kW inverter or only two required for a 10kW inverter.

The battery has up to 6000+ cycles depending on the DoD of the battery.*

• 1.5 C industry leading C- rating allows single battery deployments for 5kW inverter systems
• 3.686 kWhrs capable of 15units in parallel totaling 55.29kWhrs
• RS485 and CAN communication ensures full compatibility with KODAK and Sunsynk
• Industry leading 95% DOD allowing for more useable capacity from the battery
• 10 year standard warranty

Due to the high discharge power of the BL3.6 Kodak battery, it is highly recommended to use bus bars for the battery connections.

• 150A Bus bar
• 250A Bus bar
• 600A Bus bar

*Cycle life depends on DoD set via inverter.

80% DoD @ 25°C = 6000+ cycles.

Up to 95% DoD @25°C = 3600+ cycles.

Due to the ongoing effect of Covid-19 and the worldwide chip shortage, certain suppliers had to resort to alternative component suppliers. This has affected the compatibility of specific inverter and battery combinations. Please see the Application Note New Pylontech firmwareorApplication Note Kodak user settingsfor more info.

Important

Due to the ongoing effect of Covid-19 and the worldwide chip shortage, certain suppliers had to resort to alternative component suppliers. This has affected the compatibility of specific inverter and battery combinations. Please see the Application Note Kodak user settings for more info.

Documents

• Application Note Kodak user settings
• Data Sheet BL3.6
• User Manual BL3.6
• Warranty BL3.6